More info
Taft Hobby Futura V3 Turbine JETÂ ARF + Landing gear with brakes (option)
Description
The Futura Taft Hobby model is a powerful and manoeuvrable RC jet engine dedicated to aerobatics allowing spectacular flight figures. Taft Hobby offers a version for the installation of a turbine reactor up to 6kg. Its “Audi” livery is at the top to shine on the fly fields.
Features
- The High Performance EPO Turbine / EDF Jet.
- Easy To fly, short distance take off and landing.
- Flexible to fly with perfect inverted flight, rolls , loop…etc.
- With all wooden structure and heat proof work done.
- Ready to install your turbine and fly.
Technical Specifications
- Wingspan: 1450mm / 57.3in
- Length:Â 1550mm / 61.0in
- Flying weight: around 6000g /Â 211.64oz
- Ailerons:Â Yes
- Elevator:Â Yes
- Rudder:Â Yes
- Flaps: Yes
- Recommended Radio: 7-8 channel
- Recommended environment:Â Outdoor
Content
- Taft Hobby Futura V3 Turbine JET PNP
Required
- Turbine: KingTech K60G or Similar Turbine Engine with 6kg of thrust @ 15°C
- Fuel Tank Main Tank around 1350cc
- Header Tank around 120cc
- Electric Retract Landing Gear With Magnetic Brakes (Available as an accessory on this page – please add a sequencer)
- Servos : 2x12g, 7x25g
- 7-Channel radio transmitter
- 7-Channel receiver
Data sheet
| Type of kit: | ARF |
| Wingspan (mm): | 1450mm / 57.3in |
| Length (mm): | 1550mm / 61.0in |
| Flying weight (gr) | around 6000g / 211.64oz |
| CG (Center of Gravity) | Check manual |
| Surfaces | Ailerons, Elevator, Rudder, Flaps |
| Material | EPO Foam |
| Required Radio | Minimum 7 channels |
| Recommended pilot skill level | Intermediate, Advanced |






















Beoordelingen
Er zijn nog geen beoordelingen.