SebArt Avanti XS 120mm Jet 1.9m (White/Yellow/Gold) ARF (+ Landing Gear)

Following the success of the Avanti S Mini version in EDF and kerosene, Sebart offers a larger version with the possibility of installing both versions of the engine.

Like its little brother, the Avanti XS, with a wingspan of 1.80m and a length of 1.90m, is designed in the same way, namely a fuselage fiberglass painted after demolding, wings and stabilizers with Oracover and the electric retractable landing gear equipped with brakes, the traps, their three servos and the sequencer traps are already installed.

As the all other products of the brand, the construction and the finish are of irreproachable quality. This model is intended for a 120mm EDF turbine or Kerosene P60/P70. Its weight in flight in EDF version equipped with a 12S 8500mAh battery (2x 6S) is 8.5kg and for the Kerosene version is 7.5kg empty tank.

Characteristics

• Wing Span: 1800mm / 70.86in
• Length: 1900mm / 74.80in
• 7.5kg flying weight with P60/P70 turbine empty tank
• 8.5kg flying weight with an EDF 120mm + battery
• All parts of the fuselage are fiber
• Wings and Stabilizer in Oracover
• Electric landing gear

• SebArt Avanti XS 120mm Jet 1.9m (White/Yellow/Gold) ARF
• Complete electric landing gear with brakes
• All hardware and all plastic parts needed to assemble the kit
• Cockpit and canopy
• Decals
• Detailed illustrated instructions

• Radio 7 ch. minimum 
• 6x MG minis servos + 2 standard servos for flaps
• Battery: 2x LiPo 6S 5000mAh (EDF version)
• ECS 150A brushless Ubec 12A (EDF version)
• Conversion kit (Turbine version)
• Turbine or EDF

Recommended power set up: