Aanbieding!

RBC Kits SAAB J-29 "Tunnan" EDF 90mm (Wood Kit CNC)

RBC Kits SAAB J-29 "Tunnan" EDF 90mm (Wood Kit CNC) - Afbeelding 2

RBC Kits SAAB J-29 "Tunnan" EDF 90mm (Wood Kit CNC) - Afbeelding 3

RBC Kits SAAB J-29 "Tunnan" EDF 90mm (Wood Kit CNC) - Afbeelding 4

RBC Kits SAAB J-29 "Tunnan" EDF 90mm (Wood Kit CNC) - Afbeelding 5

RBC Kits SAAB J-29 "Tunnan" EDF 90mm (Wood Kit CNC) - Afbeelding 6

RBC Kits SAAB J-29 “Tunnan” EDF 90mm (Wood Kit CNC)

Oorspronkelijke prijs was: 190,83 €.Huidige prijs is: 99,99 €.

Artikelnummer: RBC-J29 Categorieën: Airplanes, Jets EDF

100% kwaliteitsbelofte
Veilige transacties, tevreden klanten
7 dagen gratis retourneren
Meerdere betaalmethoden, veilig en betrouwbaar

Beschrijving
Beoordelingen (0)

More info

RBC Kits SAAB J-29 “Tunnan” Jet EDF 90mm (Wood Kit CNC)

Turbines RC is pleased to introduce the new RBC range of high-quality all-wood kits to assemble yourself. All CTP and Balsa parts are CNC cut. You can fligh it with a 8S Li-Po battery.

The SAAB J-29 “Tunnan” is very easy to fly and lands slow as a trainer.

RBC jets are made for standard combos (motor + EDF) available on our website.

Nota: It is possible to install electric retracts.

Technical specifications

All Formers And Ribs CNC Cut
Unique Tab Lock Design
Removable wings for easy transportation and storage

Features

Wing Area: 45.4dm2
Wing Span: 1420mm
Total lenght: 1350mm
Flight Weight: starts at 4400grams
Functions: 7 Channel, ailerons, elevator, flaps, throttle, retracts and nosewheel steering
EDF: Midi Fan 90mm (not included)

Includes

SAAB J-29 “Tunnan” wood kit (to be assemble)
Full Size Rolled Cad Plans With All Parts Shown
Vacuformed Canopy, nose cone and wing tips
PVC/Paper oulet and inlet tube
All wood and sheeting
No hardware in this kit
Instructions manual in English (downloadable hereunder)
All Mounting pictures by the hereunder link :
https://www.rbckitsinstructions.com/edf-jets/instructions-j29-tunnan

Requires

7 Channel Radio
Light weight Receiver
Light weight Servos: 6x13gr metal gear
Wemotec Midi fan or Schubeler HDS51 or any other 90mm fan
Motor HETrc EDF650/1500 8S ou 650-58-1970 6S
Battery: 8S Li-Po 5000mAh / 6S Li-Po 5800mAh
Thick and Thin CA glue, 3/3
Small parts : nuts, hinges, horns, steel wires, screws…

Wing classic build wood ribs and formers sheeted

airframe build up step by step

Vacuumformed parts making life a bit easier

Retracts working almost as the real one

Batteries and receiver easy accessible through canopy

Data sheet

Type of kit:	Wood kit
Wingspan (mm):	1420
Length (mm):	1350
Flying weight (gr)	4400
Wing Surface Area:	45.4 dm²
CG (Center of Gravity)	Check manual
Servos	6x13gr metal gear
EDF Diameter Class (mm):	90
Battery Cells:	8s – 29.6v
Battery Capacity (mAh)	5.000 mAh
Surfaces	Ailerons, Elevator, Flaps
Landing Gear	Retractable
Material	ABS, Balsa, Wood
Required Radio	Minimum 7 channels