Hacker A30-14M-DF Motor 35mm 3500Kv

• Diameter: 35mm
• Length (only motor): 33mm
• Lenght (motor+DF mount included): 62mm
• Shaft Diameter: 3.17mm
• Weight: 110 grams
• KV: 3500
• Poles: 6
• Recommended advance timing: 10°
• Recommended frequency: nc
• Motor Type: Outrunner
• 4x M4 screws (not provided)

WARNING: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.