More info
FMSÂ J3 V3 1400mm PNP with Floats
The new V2 edition of the FMS 1400mm Piper J3 is more attactive in its appearance, more importantly, it can meet the request of many customers to the greatest extent in that float is also added to the design.Â
The Piper J-3 Cub is an American light aircraft that was built between 1937 and 1947 By the Piper Aircraft Company as an affordable trainer. The aircraft has a simple, lightweight design which gives it good low-speed handling properties and short-field performance. During the WWII, J-3 Cub was designated as L-4 Grasshopper, used extensively for reconnaissance, transporting supplies, artillery spotting duties and medical evacuation of wounded soldiers.Â
Like its full-sized counterpart, the all-new FMS 1400mm J-3 V3 has excellent short takeoff and landing (STOL) and slow speed handling characteristics. FMS has dedicated significant amount of resources in making this aircraft as detailed as possible- components such as the engine and landing gear, among many others, are replicated in detail. FMS has selected an attractive, historically accurate red paint scheme for the V3 Cub.Â
For pilots who are looking for an easy-to-fly, scale aircraft that has gentle trainer characteristics, plenty of power and graceful lines from the golden-age of flight- the 1400mm FMS J-3 V3 is all of that.
Technical Specifications
- Wingspan:Â 1400mm / 55.1in
- Length:Â 900mm / 35.4in
- Flying Weight: around 1320g / 46.56oz (include floats)
- Powerfull Motor: Brushless 3536-KV850
- ESC: 40A Predator
- Highly detailed scale engine and landing gear
- Simple structure for quick assembly
- Pre-installed ball-linked control horns for increased throw and precision
- Servos: 4x9g (with floats)
- Ailerons:Â yes
- Elevator:Â yes
- Rudder:Â yes
- Flaps: no
- Retracts: no
- 2-blades 11×7 Propeller
- Approx. during flying: 5 minutes
Includes
- FMS J3 V3 1400mm PNP
- Floats
- English manual
Requires
- Minimum 4 channels radio
- 4 channels receiver
- 3 cells 11.1V 2200mAh 25C Lipo batteryÂ
- Lipo battery charger 3 cells
- 45 minutes for mounting
Data sheet
| Type of kit: | PNP |
| Wingspan (mm): | 1400mm / 55.1in |
| Length (mm): | 900mm / 35.4in |
| Flying weight (gr) | 1320g / 46.56oz (float included) |
| CG (Center of Gravity) | Check manual |
| Servos | 4x 9g standard gear |
| Propeller | 11*7 2-blades |
| Power System | Brushless 3536-KV850 |
| Turns/min/Volt (Kv): | 850Kv |
| Motor Type: | Out-Runner |
| Electronic Speed Control | 40A |
| Battery Cells: | 3s – 11.1v |
| Discharge Rate (C): | 25c |
| Surfaces | Ailerons, Elevator, Rudder |
| Material | EPO Foam |
| Build time | 1 hour |
| Required Radio | , 4 channels minimum |
| Recommended pilot skill level | Beginner, Intermediate |

















































Beoordelingen
Er zijn nog geen beoordelingen.